Yurt Specialists.com
- Makers & suppliers of traditional yurts

You may find multiple yurt suppliers in the yurt market. Each yurt supplier has their own designs. Why buy a yurt(s) from Yurt Specialists? The table below explains some reasons.

 Yurt Specialists Other yurt suppliers
 1.        Yurt specialists is a family business with three generations of yurtmaking experience. We have taken the traditional Mongolian‘Ger’ concept and added on our own improvements, to ensure our yurts  are suitable for the varied European climate . Our family and workshops are located in Inner Mongolia, and we keep stock the of yurts in Oxford UK.  1.        From Mongolia, Maniland China, or made locally in the UK.                                              
 2.        All our yurts come with a uniquely designed double layer yurt groundsheet. This consists of a waterproof PVC underside, with a 100% canvas top layer, providing a  carpet effect for interior. The groundsheet encompasses the entire yurt base and curves up at the lower wall, tucking up neatly between the canvas and felt section of a yurt. This providesexcellent protection from surface water even in the heaviest of downpours,. The curved section also prevents any draughts around the base. 2.       No ground sheet. –We have seen what happens when a yurt isnt protected from damp, expecially the underside. In the long term, the lower walls can absorb ground moisture attracting mould and other problems. Other yurt suppliers recommend methods such as fixing wooden batterns around the yurt base and siliconing them to stop water running into the yurt. We found this method to be unreliable,and unsightly .
 3.        We have increased the wall height of our yurts  –to  1.6m min. height. This is much taller than an average Mongolian Ger wall . Our design allows more standing space to be utilised within.

3.        Lower wall height – loss of space. It is not practical, expecially for taller persons.

 4. We are able to make yurts up to 6 metres in diameter without using central supports (dragon posts).This is because our yurt walls (khana) are made from densley spaced whole poles of steam bent willow wood, which is known in our region for its strength. The poles are then fastened with traditional rawhide. These heavyweight walls set us apart from other yurtmakers, creating an extremley strong yurt structure. The steam curve in the wall khana acts rather like the human spine, in that it is more able to flex under heavy strain. Our roof poles are made with whole poles of softwood,they also enable the yurt to transfer any extra weight caused by heavy snow etc.

4.        Many yurt suppliers insist on even their smaller yurts having central support posts.  These supports are designed to take the weight of the roof crown . The problem is they get in the way, expecially in smaller yurts, effecting whether large furniture or a double bed can be used within the yurt.The main reason many yurt makers require these supports is their wall sections are mostly lighter weght machine made trellis of varying qualities. Granted, this wall type is easier to carry around, however this type of flat wall cannot take heavy loads, so requires the extra supports.

 5.        All of our standard  yurts come with wall windows situated at 3 -12- 9 oclock positions. Each window is triple layered. Firstly a mosquito net is sewn in, then a removable clear pvc layer, and finally an insulated roll down cover. All parts are sealed tightly with rot proof velcro fastenings. Our windows are designed so they do not compromise on the yurts heat efficiency.

5.     Mongolian yurts traditional do not have wall windows. We accept that the demands of Asias nomads were a little simpler than what we require from a yurt in the 21st century.We feel that windows offer a chance for the yurt dweller to feel more in conection with their surrounding environment. Windows can also offer extra air circulation in hotter periods.  

 6.        For the yurts insulation and  weather protection we prefer to use a three layer system. It is a tried and tested design. For the  outer cover we have sourced  a white  16 oz breathable polycanvas, which is silicone treated to resist water.We have sold many yurts using this canvas, and find it to be the perfect alternative to more unpredictable wax sealed canvas.It is also very durable, and can be spot cleaned  Next is a 10mm sheep's wool felt insulation, suitable for year round use In the UK. Finally, a white polyester inner lining. This lining covers the felt, and allows light to reflect around the yurt.  We have found that any additional layers, such as sun covers, to  be unnecessary in our UK climate.They also inhibit the ability of the  yurt to dry out after wet periods.6.      Other suppliers vary in their preferences for which type of canvas is most suited to the UK.Beware cheap imports that use a non treated canvas layer, these generally are fine for the dry climate of Mongolia, but will soon leak and rot in wetter regions. At the other end there are suppliers who insist on four or more layers including ( non breathable) plastic roof layers. We find this to be an unnecessary extra cost, as well as being more labour intensive. When it comes to yurts, simplifying is often the best option. 
 7.        Strapping/ropes- For the interior load bearing straps we use 40mm rot resistant webbing. They never wear out.For the outer straps we use genuine horsehair to keep with the traditional appearance. This is a strong and weather resistant material.

7.        Many suppliers use cotton straps, which are prone to rotting.

 8.        We supply two roof caps with all our yurts. They both come with horsehair straps. One is a fully insulated canvas cap with pre-cut flue hole. The other has a clear pvc section, ideal for allowing extra light into the yurt during the summer months.

8.        Some suppliers may charge extra for two roof caps.